Projects / Ideas / Small CNC router with GRBL

Small CNC router with GRBL

AdvancedIndustrialIdeaReviewed
In short

How do you build a small CNC router with GRBL?

A three-axis CNC router with GRBL cuts wood and PCBs from G-code. You need Arduino Uno R3, CNC shield V3 for Uno, NEMA 17 stepper motor × 3, DRV8825 stepper driver × 3, Lead screw T8 with nut (300 mm) × 3, Linear rod 8 mm with LM8UU bearings × 3, Aluminium extrusion 2020 (500 mm) × 6, Limit switch (micro switch with lever) × 3, SMPS 12 V 5 A (metal case) and Mini drill (PCB, 12 V).

Level
Advanced
Time
About 1200 min
Parts
10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build and tune a CNC machine.

Parts list

How to build it

  1. Build a rigid frame
  2. Fit lead screws and rods
  3. Flash GRBL
  4. Set steps per mm and limits
  5. Run a test cut with goggles on

Related projects

Common questions

What parts do I need for the small CNC router with GRBL?

Arduino Uno R3, CNC shield V3 for Uno, NEMA 17 stepper motor × 3, DRV8825 stepper driver × 3, Lead screw T8 with nut (300 mm) × 3, Linear rod 8 mm with LM8UU bearings × 3, Aluminium extrusion 2020 (500 mm) × 6, Limit switch (micro switch with lever) × 3, SMPS 12 V 5 A (metal case) and Mini drill (PCB, 12 V).

How long does the small CNC router with GRBL take to build?

About 1200 minutes for a advanced maker.