CNC shield V3 for Uno
Holds four A4988 or DRV8825 drivers for a GRBL CNC on an Uno.
What is the CNC shield V3 for Uno and what is it used for?
Holds four A4988 or DRV8825 drivers for a GRBL CNC on an Uno. Makers use it for laser engravers, CNC routers.
A carrier that routes the Uno's step and direction pins to four plug-in stepper drivers.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Stepper driver carrier for GRBL |
| Supply voltage | 12 to 36 V |
| Interface | Uno pins |
| Rating | Depends on the drivers fitted |
Pinout
How to use it
Flash GRBL 1.1 to the Uno, fit A4988 or DRV8825 drivers the right way round, set each driver's current and send G-code with Universal Gcode Sender. Never plug in or pull out drivers with power on.
Applications
Builds that use it
Alternatives
- A4988 stepper driverDrivers to fit
- TMC2209 stepper driverQuieter drivers that also fit
Common questions
What is the CNC shield V3 for Uno used for?
In maker projects: laser engravers, CNC routers.
How does the CNC shield V3 for Uno work?
A carrier that routes the Uno's step and direction pins to four plug-in stepper drivers.
What voltage does the CNC shield V3 for Uno need?
12 to 36 V.
How do I connect the CNC shield V3 for Uno to an Arduino or ESP32?
Uno pins. Pins: X Y Z A (Driver sockets), Jumpers under each driver (Microstep select), EN (Pin 8, low enables all drivers), Limit switches (Pins 9 10 and 12 (GRBL 1.1)), Spindle (Pin 11 PWM), 12 to 36 V (Motor supply terminal).
What can I use instead of the CNC shield V3 for Uno?
A4988 stepper driver and TMC2209 stepper driver.
