Components / Boards / Arduino Uno R3

Arduino Uno R3

ATmega328P-based educational microcontroller development board.

MicrocontrollerATmega328P
Clock16 MHz
Flash32 KB (0.5 KB used by bootloader)
RAM2 KB SRAM, 1 KB EEPROM
Development BoardsReviewedMPN A000066Used in 232 projects
UNO
In short

What is the Arduino Uno R3 and what is it used for?

ATmega328P-based educational microcontroller development board. Makers use it to learn digital pins and ADC.

In the real world

Simple automation and classroom projects

How it works

Development boards expose computing and I/O for prototyping. Exact board revision and power circuitry determine safe external connections.

Key specifications

Development board specValue
MicrocontrollerATmega328P
Clock16 MHz
Flash32 KB (0.5 KB used by bootloader)
RAM2 KB SRAM, 1 KB EEPROM
Logic level5 V
Input voltageUSB 5 V, or 7 to 12 V on the barrel jack
I/O pins14 digital (6 with PWM: 3, 5, 6, 9, 10, 11), 6 analog inputs
ADC10-bit
WirelessNone
Current per I/O pin20 mA recommended per I/O pin

Pinout

5V / 3.3VRegulated outputs
GNDGround
VINRaw input from the barrel jack
D0 / D1Serial RX / TX, shared with USB
D2, D3External interrupts
D3, 5, 6, 9, 10, 11PWM outputs (marked ~)
D13Onboard LED
A0 to A5Analog inputs; A4 / A5 are also I2C SDA / SCL

How to use it

Program it over USB from the Arduino IDE. Use a series resistor for every LED, and a driver for anything that draws more than a few tens of mA.

void setup() { pinMode(13, OUTPUT); }
void loop() {
  digitalWrite(13, HIGH); delay(500);
  digitalWrite(13, LOW);  delay(500);
}

Applications

Alternatives

Buy at

Common questions

What is the Arduino Uno R3 used for?

In products: simple automation and classroom projects. In maker projects: learn digital pins and ADC.

How does the Arduino Uno R3 work?

Development boards expose computing and I/O for prototyping. Exact board revision and power circuitry determine safe external connections.

What can I use instead of the Arduino Uno R3?

Arduino Nano and ESP32 DevKit V1.