Idea
In short
How do you build a coreXY pen plotter?
A CoreXY mechanism draws A4 sketches from SVG files with a servo pen lift. You need Arduino Uno R3, CNC shield V3 for Uno, NEMA 17 stepper motor × 2, A4988 stepper driver × 2, SG90 Micro Servo, GT2 timing belt and pulley set, Limit switch (micro switch with lever) × 2 and 12 V 2 A DC adapter.
- Level
- Advanced
- Time
- About 720 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Move in X and Y with two motors.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Motor Drivers
- Motors & Actuators
- Mechanical & Hardware
- Switches
- Power
How to build it
- Build the CoreXY frame
- Mix X and Y from two motors
- Home on limit switches
- Load GRBL
- Plot from G-code
Common questions
What parts do I need for the coreXY pen plotter?
Arduino Uno R3, CNC shield V3 for Uno, NEMA 17 stepper motor × 2, A4988 stepper driver × 2, SG90 Micro Servo, GT2 timing belt and pulley set, Limit switch (micro switch with lever) × 2 and 12 V 2 A DC adapter.
How long does the coreXY pen plotter take to build?
About 720 minutes for a advanced maker.
