Limit switch (micro switch with lever)
Lever switch for end stops and door detection.
Colour / typeSPDT micro switch
Contact rating5 A 250 V AC
PackageSnap-action with lever
SwitchesReviewedMPN KW11-3ZUsed in 30 projects
In short
What is the Limit switch (micro switch with lever) and what is it used for?
Lever switch for end stops and door detection. Makers use it for CNC end stops, machine limits.
How it works
A snap-action spring flips the contacts quickly at a set lever position.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | SPDT micro switch |
| Contact rating | 5 A 250 V AC |
| Package | Snap-action with lever |
Pinout
COMCommon
NONormally open
NCNormally closed
How to use it
For an endstop wire COM to GND and NC to an input with a pull-up, so a broken wire reads as triggered. Its 5 A rating suits mains loads too.
Applications
CNC end stopsmachine limits
Builds that use it
Guided build
Balcony garden rain cover
Guided build
Time-lapse slider
Guided build
Light-following curtains
Guided build
3D printer filament runout and jam sensor
Guided build
Automatic sliding door model
Guided build
Mini robot vacuum with bump sensors
Guided build
Motorised curtain that opens at sunrise
Guided build
Two-motor bump robot
Showing 8 of 30
Alternatives
- Micro switch with roller leverRoller version
- Photo interrupter module (end stop)Contactless
Common questions
What is the Limit switch (micro switch with lever) used for?
In maker projects: CNC end stops, machine limits.
How does the Limit switch (micro switch with lever) work?
A snap-action spring flips the contacts quickly at a set lever position.
What can I use instead of the Limit switch (micro switch with lever)?
Micro switch with roller lever and Photo interrupter module (end stop).
