For schools

A 10-session plan for your school tinkering lab

From a first circuit to a webcam project, using free browser tools. Each session links to the tool the students will use.

The plan

  1. Session 1What is a circuit?Battery, switch, bulb and wire. Build a simple loop and break it on purpose.Circuit builder
  2. Session 2Resistors and LEDsWhy an LED needs a resistor. Work out the value, then check it on screen.Calculators
  3. Session 3Switches and logicAND, OR and NOT with real inputs. Predict the output before you test.Digital trainer
  4. Session 4Meet the ArduinoBlink an LED with blocks, then see the same program as text.Code workspace
  5. Session 5SensorsRead a light or distance sensor and show the number on screen.Guided builds
  6. Session 6Make something moveServo and buzzer projects with the wiring shown step by step.Guided builds
  7. Session 7Design a caseDraw a box for the project and get it ready for 3D printing.Enclosure maker
  8. Session 8Teach the cameraUse the webcam to recognise a hand or a colour, with nothing uploaded.Webcam AI
  9. Session 9Connect it to the internetSend a sensor reading to a live page from an ESP32.IoT workspace
  10. Session 10Show and tellEach team presents one build: what it does, what failed, what they fixed.Lessons

Each session fits a 60 to 90 minute period. Spend the first 10 minutes on a question, the middle on building, and the last on what went wrong.

Questions schools ask

Is this the official Atal Tinkering Lab curriculum?

No. It is an independent 10-session plan for a school tinkering lab, built from ElectroLark tools that already exist. It is not issued or approved by the Atal Innovation Mission.

Which classes is it for?

Written for Classes 6 to 12 with an adult or teacher present. Sessions 1 to 4 need no earlier electronics; sessions 5 to 10 build on them.

What does a school need?

A few laptops or tablets with a browser. The circuit builder, digital trainer, code workspace and webcam AI all run in the browser. For real builds, an Arduino or ESP32 kit and a USB cable.

Is it safe for children?

The tools run in a browser and only simulate circuits. For real builds use low-voltage battery or USB power, never mains, and keep an adult present. The webcam AI never uploads video.

What does it cost?

The browser tools and lessons are free. A school can open a class on the faculty portal free; plans are listed on the pricing page.