Workshop
Workshop
Free tools in your browser. Nothing to install.
Design and simulate
Connect and measure
Make it real
Calculate and look up
Your saved boards, meters and printers are in My Garage, My gear. Serial and USB use your browser's own permission prompt. Readings stay on your device unless you save or share them.
Common questions
What can I do in the Workshop?
Build a circuit and watch the voltages and currents, check Arduino code, simulate Verilog, read a board's serial output, flash an ESP32, check Gerber files, design a 3D-printable enclosure and plot lab readings, all in the browser.
Can ElectroLark make my PCB or 3D print?
Yes. PCBs are made by ElectroLark from ₹1,500 a board after a Gerber check, and 3D prints cost ₹10 a gram + GST, worked out from your file.
