Idea
In short
How do you build a mini claw machine?
A small claw machine with two stepper axes, a servo claw, a joystick and a coin slot switch. You need Arduino Uno R3, CNC shield V3 for Uno, NEMA 17 stepper motor × 2, A4988 stepper driver × 2, SG90 Micro Servo, Joystick module (dual axis), Limit switch (micro switch with lever) × 3, Arcade push button 30 mm and 12 V 2 A DC adapter.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control two axes and a gripper together.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Motor Drivers
- Motors & Actuators
- Sensors
- Switches
- Switches
- Power
How to build it
- Home both axes on limit switches
- Move with the joystick
- Drop, close and lift the claw on button press
- Return to the chute
- Add a timer per game
Common questions
What parts do I need for the mini claw machine?
Arduino Uno R3, CNC shield V3 for Uno, NEMA 17 stepper motor × 2, A4988 stepper driver × 2, SG90 Micro Servo, Joystick module (dual axis), Limit switch (micro switch with lever) × 3, Arcade push button 30 mm and 12 V 2 A DC adapter.
How long does the mini claw machine take to build?
About 600 minutes for a advanced maker.
