Components / Sensors / INA226 current and power monitor

INA226 current and power monitor

High-side current and voltage monitor up to 36 V with 16-bit precision.

MeasuresBus voltage, shunt current, power
Range0 to 36 V
InterfaceI2C
I2C address0x40 to 0x4F
SensorsReviewedMPN INA226Used in 7 projects
INA226
In short

What is the INA226 current and power monitor and what is it used for?

High-side current and voltage monitor up to 36 V with 16-bit precision. Makers use it for solar and battery monitoring.

How it works

A precise ADC measures the small voltage across a shunt resistor and the bus voltage, then calculates power.

Key specifications

Sensor specValue
MeasuresBus voltage, shunt current, power
Range0 to 36 V
InterfaceI2C
I2C address0x40 to 0x4F
Supply voltage2.7 to 5.5 V

Pinout

VCC2.7 to 5.5 V
GNDGround
SCLI2C clock
SDAI2C data
ALEAlert
VBSBus voltage sense
IN+ and IN−Shunt connections in series with the load

How to use it

Put the shunt in the high side of the load. Tell the library the shunt value (0.1 Ω on most boards, about 0.8 A full scale) or fit a smaller shunt for more current.

Applications

Alternatives

Buy at

Common questions

What is the INA226 current and power monitor used for?

In maker projects: solar and battery monitoring.

How does the INA226 current and power monitor work?

A precise ADC measures the small voltage across a shunt resistor and the bus voltage, then calculates power.

What voltage does the INA226 current and power monitor need?

2.7 to 5.5 V.

How do I connect the INA226 current and power monitor to an Arduino or ESP32?

I2C. Pins: VCC (2.7 to 5.5 V), GND (Ground), SCL (I2C clock), SDA (I2C data), ALE (Alert), VBS (Bus voltage sense).

What can I use instead of the INA226 current and power monitor?

INA219 Current Monitor and INA3221 3-channel current monitor.