Idea
In short
How do you build a bench power meter?
A current and power monitor shows volts, amps, watts and watt-hours for small loads such as motors and LED strips. You need Arduino Nano, INA226 current and power monitor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure power with a monitor chip.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Wire the monitor in series
- Read bus voltage and current
- Compute power
- Accumulate watt-hours
- Reset with the button
Common questions
What parts do I need for the bench power meter?
Arduino Nano, INA226 current and power monitor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the bench power meter take to build?
About 270 minutes for a intermediate maker.
