Idea
In short
How do you build a device power profile recorder?
A current monitor records how much a small device draws while it wakes, sends and sleeps. You need Arduino Nano, INA226 current and power monitor, SSD1306 OLED Display, MicroSD Card Module and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure the power use of a low-voltage project.
Parts list
- Development Boards
- Sensors
- Displays
- Interfaces
- Prototyping
How to build it
- Insert the monitor in the supply line
- Read voltage and current
- Sample quickly around events
- Log to a card
- Work out average current and battery life
Common questions
What parts do I need for the device power profile recorder?
Arduino Nano, INA226 current and power monitor, SSD1306 OLED Display, MicroSD Card Module and Breadboard 830 Tie Points.
How long does the device power profile recorder take to build?
About 270 minutes for a intermediate maker.
