INA3221 3-channel current monitor
Measures three supply rails at once.
MeasuresVoltage and current on 3 channels
Range0 to 26 V
InterfaceI2C
I2C address0x40 to 0x43
SensorsReviewedMPN INA3221Used in 2 projects
In short
What is the INA3221 3-channel current monitor and what is it used for?
Measures three supply rails at once. Makers use it for multi-rail power testing.
How it works
Three shunt and bus voltage channels multiplexed into one ADC.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Voltage and current on 3 channels |
| Range | 0 to 26 V |
| Interface | I2C |
| I2C address | 0x40 to 0x43 |
| Supply voltage | 2.7 to 5.5 V |
Pinout
VS2.7 to 5.5 V
GNDGround
SCLI2C clock
SDAI2C data
CH1 to CH3Shunt connections for each channel
PVPower valid output
CRI and WRNAlert outputs
How to use it
Measures three rails at once, for example battery, solar and load. Check whether your board's channels share a ground and which shunt values are fitted.
Applications
Multi-rail power testing
Builds that use it
Alternatives
- INA226 current and power monitorSingle channel, higher voltage
Common questions
What is the INA3221 3-channel current monitor used for?
In maker projects: multi-rail power testing.
How does the INA3221 3-channel current monitor work?
Three shunt and bus voltage channels multiplexed into one ADC.
What voltage does the INA3221 3-channel current monitor need?
2.7 to 5.5 V.
How do I connect the INA3221 3-channel current monitor to an Arduino or ESP32?
I2C. Pins: VS (2.7 to 5.5 V), GND (Ground), SCL (I2C clock), SDA (I2C data), CH1 to CH3 (Shunt connections for each channel), PV (Power valid output).
What can I use instead of the INA3221 3-channel current monitor?
INA226 current and power monitor.
