Projects / Ideas / E-bike battery and power meter

E-bike battery and power meter

IntermediateVehiclesIdeaReviewed
In short

How do you build an e-bike battery and power meter?

A shunt and an INA226 measure current and voltage of a 36 V e-bike battery and show watts, Wh used and range. You need Arduino Nano, INA226 current and power monitor, Shunt resistor 0.1 Ω 2 W, SSD1306 OLED Display and DC-DC step-down 24 V to 12 V 10 A.

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure high-side power and estimate range.

Parts list

How to build it

  1. Fit a low-value shunt in the battery lead
  2. Set the INA226 calibration for that shunt
  3. Integrate watt-hours
  4. Estimate range from recent Wh per km
  5. Fuse every connection

Related projects

Common questions

What parts do I need for the e-bike battery and power meter?

Arduino Nano, INA226 current and power monitor, Shunt resistor 0.1 Ω 2 W, SSD1306 OLED Display and DC-DC step-down 24 V to 12 V 10 A. Shunt resistor 0.1 Ω 2 W: Use a 2 mΩ shunt for 20 A. DC-DC step-down 24 V to 12 V 10 A: Use a buck that accepts 42 V.

How long does the e-bike battery and power meter take to build?

About 240 minutes for a intermediate maker.