Idea
In short
How do you build a home inverter battery monitor?
An INA226 and a shunt measure the inverter battery's voltage and current, showing state of charge and how long the backup will last. You need ESP32 DevKit V1, INA226 current and power monitor, Shunt resistor 0.1 Ω 2 W, LM2596 Buck Module and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure battery current with a shunt and estimate state of charge by counting amp-hours.
Parts list
- Development Boards
- Sensors
- PassivesUse a 50 A, 75 mV shunt for real inverters
- Power
- Displays
How to build it
- Fit a high-current shunt in the battery negative lead
- Read voltage and current with the INA226
- Add up amp-hours in and out
- Estimate hours left at the present load
- A qualified electrician should fit the shunt and fuse on large batteries
Common questions
What parts do I need for the home inverter battery monitor?
ESP32 DevKit V1, INA226 current and power monitor, Shunt resistor 0.1 Ω 2 W, LM2596 Buck Module and SSD1306 OLED Display. Shunt resistor 0.1 Ω 2 W: Use a 50 A, 75 mV shunt for real inverters.
How long does the home inverter battery monitor take to build?
About 240 minutes for a intermediate maker.
