Projects / Ideas / Sleep current tester

Sleep current tester

AdvancedPowerIdeaReviewed
In short

How do you build a sleep current tester?

A monitor measures the tiny current of a sleeping board to check a battery design. You need Arduino Nano, INA226 current and power monitor, Resistor 1 kΩ and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure microamps at low power.

How to build it

  1. Select a shunt for low current
  2. Measure active current
  3. Put the target to sleep
  4. Measure the sleep current
  5. Compute battery life

Related projects

Common questions

What parts do I need for the sleep current tester?

Arduino Nano, INA226 current and power monitor, Resistor 1 kΩ and Breadboard 830 Tie Points.

How long does the sleep current tester take to build?

About 300 minutes for a advanced maker.