Digital multimeter
Measures voltage, current and resistance. The first tool every maker needs.
What is the Digital multimeter and what is it used for?
Measures voltage, current and resistance. The first tool every maker needs. Makers use it for resistor tolerance lab.
Every electronics bench
It compares the input to an internal reference and shows the result as digits.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Measures DC/AC voltage, DC current, resistance, continuity |
| Supply voltage | 9 V or 2 × AA battery |
| Interface | Probes; COM, V/Ω and A jacks |
| Rating | Look for CAT II or CAT III ratings for mains work |
Pinout
How to use it
For current, move the red lead to the A jack and put the meter in series. Move it back afterwards, or the next voltage reading will blow the fuse.
Applications
Builds that use it
Resistor tolerance explorer
Regulator efficiency study
RC time constant lab
Voltage divider explorer
Ohm's law lab with a multimeter
Variable bench power supply with LM317
DIY power bank with charge display
Darkness sensor with two transistors
Common questions
What is the Digital multimeter used for?
In products: every electronics bench. In maker projects: resistor tolerance lab.
How does the Digital multimeter work?
It compares the input to an internal reference and shows the result as digits.
What voltage does the Digital multimeter need?
9 V or 2 × AA battery.
How do I connect the Digital multimeter to an Arduino or ESP32?
Probes; COM, V/Ω and A jacks. Pins: COM (Black probe, always), VΩmA (Red probe for volts, ohms and small currents), 10A (Red probe for large currents only).
