Water pressure sensor (0 to 1.2 MPa)
Screw-in pressure sensor with a 0.5 to 4.5 V output.
What is the Water pressure sensor (0 to 1.2 MPa) and what is it used for?
Screw-in pressure sensor with a 0.5 to 4.5 V output. Makers use it for pump pressure monitoring.
A piezoresistive or ceramic sensing element bends with pressure, and a built-in amplifier outputs a ratiometric voltage.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Liquid or gas pressure |
| Range | 0 to 1.2 MPa (other ranges sold) |
| Interface | Analog 0.5 to 4.5 V |
| Supply voltage | 5 V |
Pinout
How to use it
Pressure = (Vout − 0.5) ÷ 4.0 × full scale. Use a divider on a 3.3 V ADC. Seal the thread with PTFE tape. In a tank, pressure gives water depth: 10 kPa per metre.
Applications
Builds that use it
Alternatives
- JSN-SR04T waterproof ultrasonic sensorNon-contact level measurement from above
Common questions
What is the Water pressure sensor (0 to 1.2 MPa) used for?
In maker projects: pump pressure monitoring.
How does the Water pressure sensor (0 to 1.2 MPa) work?
A piezoresistive or ceramic sensing element bends with pressure, and a built-in amplifier outputs a ratiometric voltage.
What voltage does the Water pressure sensor (0 to 1.2 MPa) need?
5 V.
How do I connect the Water pressure sensor (0 to 1.2 MPa) to an Arduino or ESP32?
Analog 0.5 to 4.5 V. Pins: Red (5 V), Black (Ground), Yellow or green (Analog output, 0.5 V at 0 to 4.5 V at full scale).
What can I use instead of the Water pressure sensor (0 to 1.2 MPa)?
JSN-SR04T waterproof ultrasonic sensor.
