Idea
In short
How do you build a biogas digester pressure monitor?
A low-pressure sensor on a biogas plant shows gas level and warns on over-pressure. You need Arduino Nano, Water pressure sensor (0 to 1.2 MPa), MQ-4 methane sensor module, Active buzzer 5 V and 16x2 LCD with I2C backpack (PCF8574).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Monitor gas safely.
Parts list
- Development Boards
- SensorsUse a low-range gauge sensor
- Sensors
- Motors & Actuators
- Displays
How to build it
- Read pressure
- Read methane at the outlet
- Alarm above limits
- Keep electronics outside the hazardous area
- Use certified parts in real plants
Common questions
What parts do I need for the biogas digester pressure monitor?
Arduino Nano, Water pressure sensor (0 to 1.2 MPa), MQ-4 methane sensor module, Active buzzer 5 V and 16x2 LCD with I2C backpack (PCF8574). Water pressure sensor (0 to 1.2 MPa): Use a low-range gauge sensor.
How long does the biogas digester pressure monitor take to build?
About 180 minutes for a intermediate maker.
