Projects / Ideas / Tap water pressure logger

Tap water pressure logger

IntermediateHome LabIdeaReviewed
In short

How do you build a tap water pressure logger?

A pressure sensor on a tap line logs pressure through the day to find out when supply pressure drops in a flat or a house. You need ESP32 DevKit V1, Water pressure sensor (0 to 1.2 MPa), ADS1115 ADC IC, MicroSD Card Module and DS3231 RTC module.

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read a 0.5 to 4.5 V pressure sensor and log it.

Parts list

How to build it

  1. Fit the sensor with a proper thread and sealing tape
  2. Read it with a 16-bit ADC
  3. Convert volts to bar
  4. Log every minute
  5. Plot the daily curve

Related projects

Common questions

What parts do I need for the tap water pressure logger?

ESP32 DevKit V1, Water pressure sensor (0 to 1.2 MPa), ADS1115 ADC IC, MicroSD Card Module and DS3231 RTC module.

How long does the tap water pressure logger take to build?

About 150 minutes for a intermediate maker.