Idea
In short
How do you build a coastal tide gauge?
A pressure sensor on a pier measures water height and logs tides. You need ESP32 DevKit V1, Water pressure sensor (0 to 1.2 MPa), ADS1115 16-bit ADC module, DS3231 RTC module, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and Waterproof enclosure IP65 (junction box).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure water level by pressure.
Parts list
- Development Boards
- Sensors
- Sensors
- Sensors
- Interfaces
- SBC Accessories
- Mechanical & Hardware
How to build it
- Mount the sensor below low tide
- Compensate for air pressure
- Log every minute
- Plot tides
- Seal against salt
Common questions
What parts do I need for the coastal tide gauge?
ESP32 DevKit V1, Water pressure sensor (0 to 1.2 MPa), ADS1115 16-bit ADC module, DS3231 RTC module, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and Waterproof enclosure IP65 (junction box).
How long does the coastal tide gauge take to build?
About 360 minutes for a advanced maker.
