Components / Sensors / JSN-SR04T waterproof ultrasonic sensor

JSN-SR04T waterproof ultrasonic sensor

Ultrasonic distance sensor with a sealed probe on a cable.

MeasuresDistance by ultrasound
RangeAbout 20 cm to 6 m (has a blind zone near the probe)
InterfaceTrigger and echo like the HC-SR04
Supply voltage5 V
SensorsReviewedMPN JSN-SR04TUsed in 12 projects
In short

What is the JSN-SR04T waterproof ultrasonic sensor and what is it used for?

Ultrasonic distance sensor with a sealed probe on a cable. Makers use it for water tank level, parking sensors.

How it works

A sealed ultrasonic transducer sends a pulse and the board times the echo.

Key specifications

Sensor specValue
MeasuresDistance by ultrasound
RangeAbout 20 cm to 6 m (has a blind zone near the probe)
InterfaceTrigger and echo like the HC-SR04
Supply voltage5 V

Pinout

5VSupply
TrigTrigger input
EchoEcho output (5 V)
GNDGround

How to use it

Wired like the HC-SR04, but the minimum distance is about 20 to 25 cm. Point the probe straight at the water surface for tank levels, and keep the cable away from motor wires.

Applications

Alternatives

Buy at

Common questions

What is the JSN-SR04T waterproof ultrasonic sensor used for?

In maker projects: water tank level, parking sensors.

How does the JSN-SR04T waterproof ultrasonic sensor work?

A sealed ultrasonic transducer sends a pulse and the board times the echo.

What voltage does the JSN-SR04T waterproof ultrasonic sensor need?

5 V.

How do I connect the JSN-SR04T waterproof ultrasonic sensor to an Arduino or ESP32?

Trigger and echo like the HC-SR04. Pins: 5V (Supply), Trig (Trigger input), Echo (Echo output (5 V)), GND (Ground).

What can I use instead of the JSN-SR04T waterproof ultrasonic sensor?

HC-SR04 Ultrasonic Sensor.