Idea
In short
How do you build a blood pressure measurement study?
A pressure sensor on a manual cuff records the oscillations as it deflates, to learn how digital BP meters work. You need ESP32 DevKit V1, Water pressure sensor (0 to 1.2 MPa), ADS1115 16-bit ADC module and SSD1306 OLED Display.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Capture and analyse a pressure waveform.
Parts list
- Development Boards
- SensorsUse a 0 to 40 kPa gauge sensor
- Sensors
- Displays
How to build it
- Read cuff pressure with a 16-bit ADC
- Pump and slowly release the cuff
- Filter out the oscillations
- Find where they peak
- Compare with a real meter, and never rely on it
Common questions
What parts do I need for the blood pressure measurement study?
ESP32 DevKit V1, Water pressure sensor (0 to 1.2 MPa), ADS1115 16-bit ADC module and SSD1306 OLED Display. Water pressure sensor (0 to 1.2 MPa): Use a 0 to 40 kPa gauge sensor.
How long does the blood pressure measurement study take to build?
About 360 minutes for a advanced maker.
