Idea
In short
How do you build a fume hood airflow monitor?
A sensor checks the face velocity of a fume hood and warns when the airflow is too low. You need Arduino Nano, Water pressure sensor (0 to 1.2 MPa), SSD1306 OLED Display, Active buzzer 5 V, LED 5 mm green and LED 5 mm red.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure low airflow.
Parts list
- Development Boards
- SensorsUse a small differential pressure sensor
- Displays
- Motors & Actuators
- Semiconductors
- Semiconductors
How to build it
- Mount the sensor in the hood opening
- Calibrate with a reference
- Warn below the required speed
- Log hours of use
- Show status lights
Common questions
What parts do I need for the fume hood airflow monitor?
Arduino Nano, Water pressure sensor (0 to 1.2 MPa), SSD1306 OLED Display, Active buzzer 5 V, LED 5 mm green and LED 5 mm red. Water pressure sensor (0 to 1.2 MPa): Use a small differential pressure sensor.
How long does the fume hood airflow monitor take to build?
About 180 minutes for a intermediate maker.
