Idea
In short
How do you build a tyre pressure checker?
A handheld gauge with a pressure sensor reads tyre pressure in psi and bar and remembers each tyre. You need Arduino Nano, Water pressure sensor (0 to 1.2 MPa), SSD1306 OLED Display, Tactile push button 6 mm, Battery holder 2 × AA, AA alkaline battery × 2 and MT3608 Boost Module.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read an analog pressure sensor and convert units.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Power
- Batteries
- Power
How to build it
- Fit the sensor to a valve chuck
- Read 0.5 to 4.5 V output
- Convert to psi and bar
- Store four tyres
- Calibrate against a known gauge
Common questions
What parts do I need for the tyre pressure checker?
Arduino Nano, Water pressure sensor (0 to 1.2 MPa), SSD1306 OLED Display, Tactile push button 6 mm, Battery holder 2 × AA, AA alkaline battery × 2 and MT3608 Boost Module.
How long does the tyre pressure checker take to build?
About 120 minutes for a intermediate maker.
