Digital oscilloscope 2-channel 100 MHz
Bench scope for real debugging.
What it doesOscilloscope
Range100 MHz bandwidth, 2 channels
Accuracy or size1 GS/s
Tools & InstrumentsReviewedMPN DS1102Z-EUsed in 13 projects
In short
What is the Digital oscilloscope 2-channel 100 MHz and what is it used for?
Bench scope for real debugging. Makers use it for debugging signals and supplies.
How it works
A fast ADC captures waveforms at up to 1 GS/s.
Key specifications
| Tool or instrument spec | Value |
|---|---|
| What it does | Oscilloscope |
| Range | 100 MHz bandwidth, 2 channels |
| Accuracy or size | 1 GS/s |
Pinout
CH1 CH2Probe inputs
EXTTrigger
How to use it
Set probes to 10x and compensate them on the calibration output. Clip the ground lead to circuit ground only, never to mains.
Applications
Debugging signals and supplies
Builds that use it
Guided build
Oscilloscope first steps
Idea
Isolated charger teardown
Idea
AC power factor demo at low voltage
Idea
Metastability and synchronisers
Idea
Power supply ripple and load tester
Idea
Phase-locked loop demo
Idea
Boost converter experiments
Idea
Two-channel DAC waveform maker
Showing 8 of 13
Alternatives
- Logic analyser 8-channel 24 MHzDigital buses
Common questions
What is the Digital oscilloscope 2-channel 100 MHz used for?
In maker projects: debugging signals and supplies.
How does the Digital oscilloscope 2-channel 100 MHz work?
A fast ADC captures waveforms at up to 1 GS/s.
What can I use instead of the Digital oscilloscope 2-channel 100 MHz?
USB oscilloscope / handheld scope (DSO138) and Logic analyser 8-channel 24 MHz.
