Idea
In short
How do you build a metastability and synchronisers?
Feed an asynchronous signal into a flip-flop near its clock edge and see why two-flop synchronisers are needed. You need 74HC74 dual D flip-flop × 2, NE555 Timer IC × 2, Resistor 10 kΩ × 4, Ceramic capacitor 1 nF × 2, Digital oscilloscope 2-channel 100 MHz, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Advanced
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand timing and metastability.
Parts list
- Integrated Circuits
- Integrated CircuitsNE555 Timer IC × 2
- PassivesResistor 10 kΩ × 4
- Passives
- Tools & Instruments
- Prototyping
- Prototyping
How to build it
- Clock one flip-flop from one 555
- Feed data from another unrelated 555
- Trigger the scope on the clock
- Look for slow or odd output edges
- Add a second flip-flop and compare
Common questions
What parts do I need for the metastability and synchronisers?
74HC74 dual D flip-flop × 2, NE555 Timer IC × 2, Resistor 10 kΩ × 4, Ceramic capacitor 1 nF × 2, Digital oscilloscope 2-channel 100 MHz, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the metastability and synchronisers take to build?
About 180 minutes for a advanced maker.
