Projects / Ideas / Boost converter experiments

Boost converter experiments

IntermediatePowerIdeaReviewed
In short

How do you build a boost converter experiments?

An XL6009 boost module raises a 5 V supply to 24 V, and you measure efficiency and ripple at different loads. You need XL6009 boost converter module, Power resistor 10 Ω 5 W (cement) × 2, Digital multimeter, Digital oscilloscope 2-channel 100 MHz and 5 V 2 A USB adapter.

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Test a ready-made boost converter.

How to build it

  1. Set the output voltage
  2. Load with resistors
  3. Measure input and output power
  4. Look at ripple on a scope
  5. Plot efficiency against load

Related projects

Common questions

What parts do I need for the boost converter experiments?

XL6009 boost converter module, Power resistor 10 Ω 5 W (cement) × 2, Digital multimeter, Digital oscilloscope 2-channel 100 MHz and 5 V 2 A USB adapter.

How long does the boost converter experiments take to build?

About 150 minutes for a intermediate maker.