Projects / Ideas / AC power factor demo at low voltage

AC power factor demo at low voltage

AdvancedPowerIdeaReviewed
In short

How do you build an AC power factor demo at low voltage?

Use a 12 V AC adapter with resistive, inductive and capacitive loads to see phase shift. You need Digital oscilloscope 2-channel 100 MHz, Shunt resistor 0.1 Ω 2 W, Inductor 100 µH, Electrolytic Capacitor 100 µF and Resistor 10 kΩ.

Level
Advanced
Time
About 180 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand real, apparent and reactive power.

How to build it

  1. Use a safe low-voltage AC source
  2. Measure V and I on the scope
  3. Find the phase
  4. Calculate power factor
  5. Add a capacitor to correct it

Related projects

Common questions

What parts do I need for the AC power factor demo at low voltage?

Digital oscilloscope 2-channel 100 MHz, Shunt resistor 0.1 Ω 2 W, Inductor 100 µH, Electrolytic Capacitor 100 µF and Resistor 10 kΩ.

How long does the AC power factor demo at low voltage take to build?

About 180 minutes for a advanced maker.