Logic analyser 8-channel 24 MHz
Cheap logic analyser for seeing I2C, SPI and UART signals in PulseView.
Function8-channel logic analyser
Supply voltageUSB
RatingUp to 24 MS/s
Logic levelUp to 5 V inputs
InterfacesReviewedMPN 24MHz 8CHUsed in 2 projects
In short
What is the Logic analyser 8-channel 24 MHz and what is it used for?
Cheap logic analyser for seeing I2C, SPI and UART signals in PulseView. Makers use it for debugging protocols.
How it works
A CY7C68013A USB chip samples eight digital lines and streams them to the PC.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | 8-channel logic analyser |
| Supply voltage | USB |
| Rating | Up to 24 MS/s |
| Logic level | Up to 5 V inputs |
Pinout
CH0 to CH7Inputs (up to 5 V)
GNDGround
CLKExternal clock
How to use it
Use PulseView (sigrok) with the fx2lafw driver. Sample at least four times faster than the signal and add the I2C, SPI or UART decoders to read the bytes.
Applications
Debugging protocols
Builds that use it
Alternatives
- USB oscilloscope / handheld scope (DSO138)See analog waveforms
Common questions
What is the Logic analyser 8-channel 24 MHz used for?
In maker projects: debugging protocols.
How does the Logic analyser 8-channel 24 MHz work?
A CY7C68013A USB chip samples eight digital lines and streams them to the PC.
What voltage does the Logic analyser 8-channel 24 MHz need?
USB.
What can I use instead of the Logic analyser 8-channel 24 MHz?
USB oscilloscope / handheld scope (DSO138).
