Projects / Ideas / Two-channel DAC waveform maker

Two-channel DAC waveform maker

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a two-channel DAC waveform maker?

A 3.3 V board with two real analogue outputs makes two waves with a phase shift to show on a scope. You need Arduino Due, Resistor 1 kΩ × 2, Ceramic Capacitor 100 nF × 2, Digital oscilloscope 2-channel 100 MHz and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make two waveforms.

Parts list

How to build it

  1. Build a sine table
  2. Output channel one
  3. Output channel two
  4. Set a phase shift
  5. Filter and view on the scope

Related projects

Common questions

What parts do I need for the two-channel DAC waveform maker?

Arduino Due, Resistor 1 kΩ × 2, Ceramic Capacitor 100 nF × 2, Digital oscilloscope 2-channel 100 MHz and Breadboard 830 Tie Points.

How long does the two-channel DAC waveform maker take to build?

About 270 minutes for a intermediate maker.