Idea
In short
How do you build an obstacle robot with a scanning sensor?
A servo sweeps an ultrasonic sensor to find the clearest direction before the robot moves. You need Arduino Uno R3, HC-SR04 Ultrasonic Sensor, SG90 Micro Servo, Robot car chassis kit 2WD (acrylic), TB6612FNG Motor Driver, 18650 Li-ion cell, Battery holder 18650 single, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Scan with a servo to pick a path.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Mechanical & Hardware
- Motor Drivers
- Power
- Power
- Prototyping
- Prototyping
How to build it
- Mount the sensor on a servo
- Scan left, centre and right
- Choose the longest path
- Drive in short steps
- Add a back-up when boxed in
Related projects
Common questions
What parts do I need for the obstacle robot with a scanning sensor?
Arduino Uno R3, HC-SR04 Ultrasonic Sensor, SG90 Micro Servo, Robot car chassis kit 2WD (acrylic), TB6612FNG Motor Driver, 18650 Li-ion cell, Battery holder 18650 single, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the obstacle robot with a scanning sensor take to build?
About 270 minutes for a intermediate maker.
