18650 Li-ion cell
Rechargeable 3.7 V cell, typically 2000 to 3000 mAh.
FunctionRechargeable lithium-ion cell
Input voltageCharge to 4.20 V with a CC/CV charger (TP4056)
Output voltage3.0 to 4.2 V, 3.6 to 3.7 V nominal
Output currentDepends on the cell: 5 A to 20 A for genuine cells
PowerReviewedMPN 18650Used in 16 projects
In short
What is the 18650 Li-ion cell and what is it used for?
Rechargeable 3.7 V cell, typically 2000 to 3000 mAh. Makers use it for battery-powered sensor nodes.
Many cheap "9900 mAh" cells are fake. Real 18650 cells top out around 3500 mAh.
In the real world
Power banks, torches
How it works
Lithium-ion cells run from about 4.2 V full to 3.0 V empty.
Key specifications
| Power module spec | Value |
|---|---|
| Function | Rechargeable lithium-ion cell |
| Input voltage | Charge to 4.20 V with a CC/CV charger (TP4056) |
| Output voltage | 3.0 to 4.2 V, 3.6 to 3.7 V nominal |
| Output current | Depends on the cell: 5 A to 20 A for genuine cells |
| Efficiency or dropout | Capacity 2000 to 3000 mAh for genuine cells |
| Protection | Use a protected cell or a protection board (DW01) |
Pinout
+ (button top)Positive
− (flat end)Negative
How to use it
Use a holder, never solder to the cell. Charge only with a Li-ion charger, and stop using it below 3.0 V.
Applications
Portable sensor nodesPower banks
Builds that use it
Guided build
Battery runtime estimator
Guided build
Mini weather station
Guided build
Solar lantern
Guided build
Meshtastic mesh node for treks
Idea
Active balancer for two cells
Idea
Light sabre toy with motion sound
Idea
Heated gloves controller
Idea
DIY power bank with an IP5306
Showing 8 of 16
Common questions
What is the 18650 Li-ion cell used for?
In products: power banks, torches. In maker projects: battery-powered sensor nodes.
How does the 18650 Li-ion cell work?
Lithium-ion cells run from about 4.2 V full to 3.0 V empty.
What voltage does the 18650 Li-ion cell need?
Charge to 4.20 V with a CC/CV charger (TP4056).
