SG90 Micro Servo
Small hobby servo with a commanded position range.
TypeMicro hobby servo, about 180°
Supply voltage4.8 to 6 V (not 3.3 V)
CurrentAbout 10 mA idle; several hundred mA when moving or stalled
Torque or outputAbout 1.8 kg·cm at 4.8 V; 0.1 s per 60°
Motors & ActuatorsReviewedMPN SG90Used in 93 projects
In short
What is the SG90 Micro Servo and what is it used for?
Small hobby servo with a commanded position range. Makers use it to learn PWM control with separate power.
In the real world
Robotics joints and mechanisms
How it works
Actuators transform electrical input into motion. Drivers and separate power supplies are often essential.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Micro hobby servo, about 180° |
| Supply voltage | 4.8 to 6 V (not 3.3 V) |
| Current | About 10 mA idle; several hundred mA when moving or stalled |
| Torque or output | About 1.8 kg·cm at 4.8 V; 0.1 s per 60° |
| Control | 50 Hz PWM: about 0.5 to 2.4 ms pulse for 0 to 180° |
| Watch out for | Do not power from the board's 5 V pin when it carries a load |
Pinout
BrownGND
Red4.8 to 6 V
OrangeSignal (PWM)
How to use it
Power it from a separate 5 V supply with grounds joined, and add 100 to 470 µF across its power wires. Pulse widths vary, so map your own end points.
#include <Servo.h>
Servo s;
void setup() { s.attach(9); }
void loop() { s.write(0); delay(800); s.write(90); delay(800); s.write(180); delay(800); }Applications
Pan and tiltSmall robot armsLatches and pointers
Builds that use it
Guided build
Knob-controlled servo
Guided build
Joystick-controlled pan-tilt camera mount
Guided build
nRF24L01 wireless servo remote
Guided build
Solar bird scarer for crop fields
Guided build
Smart air freshener
Guided build
Servo needle voltmeter
Guided build
Balcony garden rain cover
Guided build
Servo sweep and calibration
Showing 8 of 93
Alternatives
- 28BYJ-48 Stepper MotorSlow, precise, full rotation
Common questions
What is the SG90 Micro Servo used for?
In products: robotics joints and mechanisms. In maker projects: learn PWM control with separate power.
How does the SG90 Micro Servo work?
Actuators transform electrical input into motion. Drivers and separate power supplies are often essential.
What voltage does the SG90 Micro Servo need?
4.8 to 6 V (not 3.3 V).
What can I use instead of the SG90 Micro Servo?
28BYJ-48 Stepper Motor.
