Projects / Ideas / Two transistors, one load

Two transistors, one load

IntermediateLearningIdeaReviewed
In short

How do you build a two transistors, one load?

Switch the same small load with a small transistor and a power transistor and compare base current, voltage drop and warmth. You need Arduino Nano, TIP41C NPN power transistor, NPN Transistor 2N2222, Resistor 1 kΩ × 2, Resistor 220 Ω, LED 5 mm red, Digital multimeter, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare switching transistors.

Parts list

How to build it

  1. Wire the small transistor
  2. Measure the drop
  3. Wire the power transistor
  4. Compare the base current
  5. Note which is warmer

Related projects

Common questions

What parts do I need for the two transistors, one load?

Arduino Nano, TIP41C NPN power transistor, NPN Transistor 2N2222, Resistor 1 kΩ × 2, Resistor 220 Ω, LED 5 mm red, Digital multimeter, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the two transistors, one load take to build?

About 210 minutes for a intermediate maker.