Components / LEDs and lights / LED 5 mm red

LED 5 mm red

Light-emitting diode for indicators. Needs a series resistor.

Colour / typeRed, 5 mm
Forward voltageAbout 1.8 to 2.2 V at 20 mA
Max continuous current20 mA typical (check the datasheet)
Package5 mm through-hole
SemiconductorsReviewedMPN 5 mm red LEDUsed in 390 projects
In short

What is the LED 5 mm red and what is it used for?

Light-emitting diode for indicators. Needs a series resistor. Makers use it for first output on any board.

In the real world

Status lights on almost every device

How it works

An LED conducts and emits light above its forward voltage. Current, not voltage, sets its brightness.

Key specifications

LED and switch specValue
Colour / typeRed, 5 mm
Forward voltageAbout 1.8 to 2.2 V at 20 mA
Max continuous current20 mA typical (check the datasheet)
Package5 mm through-hole
PolarityLong leg anode (+), flat edge cathode (−)

Pinout

Anode (long leg)To the resistor and positive side
Cathode (short leg)To GND

How to use it

Always use a series resistor. 10 mA is already bright for indicators.

Applications

Buy at

Common questions

What is the LED 5 mm red used for?

In products: status lights on almost every device. In maker projects: first output on any board.

How does the LED 5 mm red work?

An LED conducts and emits light above its forward voltage. Current, not voltage, sets its brightness.

What voltage does the LED 5 mm red need?

About 1.8 to 2.2 V at 20 mA.