Idea
In short
How do you build a gate threshold lab?
Slowly raise the gate voltage on a small MOSFET and a logic-level one and plot when each turns on. You need 2N7000 N-channel MOSFET, IRLZ34N logic-level MOSFET, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 10 kΩ, LED 5 mm red, Resistor 220 Ω, Digital multimeter, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 11
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Find gate thresholds.
Parts list
- Semiconductors
- Semiconductors
- Passives
- Passives
- Passives
- Semiconductors
- Passives
- Tools & Instruments
- Batteries
- Power
- Prototyping
How to build it
- Wire a test jig
- Raise the gate voltage in steps
- Note when the LED lights
- Repeat with the second part
- Plot the two curves
Common questions
What parts do I need for the gate threshold lab?
2N7000 N-channel MOSFET, IRLZ34N logic-level MOSFET, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 10 kΩ, LED 5 mm red, Resistor 220 Ω, Digital multimeter, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
How long does the gate threshold lab take to build?
About 210 minutes for a intermediate maker.
