Idea
In short
How do you build a tracked tank robot with RC control?
A tank chassis with rubber tracks crosses rough ground, driven by a BTS7960 per side from a phone over Bluetooth. You need Arduino Uno R3, Tank tracks chassis kit, BTS7960 43 A motor driver × 2, HC-05 Bluetooth Module, Li-Po 3S 11.1 V 2200 mAh 30C (drone) and XT60 connector pair.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive high-current motors and steer with differential tracks.
Parts list
- Development Boards
- Mechanical & Hardware
- Motor Drivers
- Wireless
- Batteries
- Connectors
How to build it
- Wire one BTS7960 per track
- Use PWM for speed and the R/L enables for direction
- Ramp speed changes to protect the gears
- Steer by running the tracks at different speeds
- Add a fuse and a LiPo voltage alarm
Common questions
What parts do I need for the tracked tank robot with RC control?
Arduino Uno R3, Tank tracks chassis kit, BTS7960 43 A motor driver × 2, HC-05 Bluetooth Module, Li-Po 3S 11.1 V 2200 mAh 30C (drone) and XT60 connector pair.
How long does the tracked tank robot with RC control take to build?
About 240 minutes for a intermediate maker.
