Idea
In short
How do you build a bluetooth-controlled car?
A phone app sends forward, back, left and right commands to a small chassis over Bluetooth. You need Arduino Uno R3, HC-05 Bluetooth Module, Robot car chassis kit 2WD (acrylic), L298N Dual H-Bridge Module, 9 V battery, 9 V battery, Resistor 1 kΩ, Resistor 4.7 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control motors with serial commands.
Parts list
- Development Boards
- Wireless
- Mechanical & Hardware
- Motor Drivers
- Batteries
- Batteries
- Passives
- Passives
- Prototyping
- Prototyping
How to build it
- Pair the HC-05 with a phone
- Divide the TX line down to 3.3 V
- Parse single-letter commands
- Drive the motors
- Add a speed command
Common questions
What parts do I need for the bluetooth-controlled car?
Arduino Uno R3, HC-05 Bluetooth Module, Robot car chassis kit 2WD (acrylic), L298N Dual H-Bridge Module, 9 V battery, 9 V battery, Resistor 1 kΩ, Resistor 4.7 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the bluetooth-controlled car take to build?
About 240 minutes for a intermediate maker.
