Idea
In short
How do you build a tracked rover drive base?
Drive a small tracked chassis with a motor driver and a Bluetooth module, as a base for later add-ons. You need Arduino Uno R3, Tank tracks chassis kit, L298N Dual H-Bridge Module, HC-06 Bluetooth module, Li-ion 18650 pack 3S 2P (11.1 V), Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a reusable rover chassis.
Parts list
- Development Boards
- Mechanical & Hardware
- Motor Drivers
- Wireless
- Batteries
- Passives
- Prototyping
How to build it
- Assemble the tracks
- Wire the motor driver
- Set a 5 V logic supply with a buck module
- Control over Bluetooth
- Add a fuse and a power switch
Common questions
What parts do I need for the tracked rover drive base?
Arduino Uno R3, Tank tracks chassis kit, L298N Dual H-Bridge Module, HC-06 Bluetooth module, Li-ion 18650 pack 3S 2P (11.1 V), Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
How long does the tracked rover drive base take to build?
About 300 minutes for a intermediate maker.
