Idea
In short
How do you build a wall-climbing robot with a suction fan?
A light robot sticks to a smooth wall with a brushless fan's suction and drives up with two small wheels. You need Arduino Nano, Brushless motor A2212 1000 KV, 30 A brushless ESC, TB6612FNG Motor Driver, N20 micro metal gear motor × 2, Li-Po 3S 11.1 V 2200 mAh 30C (drone) and HC-05 Bluetooth Module.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Balance weight, suction force and traction.
Parts list
- Development Boards
- Motors & Actuators
- Motors & Actuators
- Motor Drivers
- Motors & Actuators
- Batteries
- Wireless
How to build it
- Build a very light frame with a skirt to seal against the wall
- Measure the fan's suction with a scale
- Drive with two N20 wheels
- Control from a phone over Bluetooth
- Use a safety tether while testing
Common questions
What parts do I need for the wall-climbing robot with a suction fan?
Arduino Nano, Brushless motor A2212 1000 KV, 30 A brushless ESC, TB6612FNG Motor Driver, N20 micro metal gear motor × 2, Li-Po 3S 11.1 V 2200 mAh 30C (drone) and HC-05 Bluetooth Module.
How long does the wall-climbing robot with a suction fan take to build?
About 480 minutes for a advanced maker.
