Idea
In short
How do you build a DIY smartwatch?
A round TFT watch with time over Wi-Fi, step count, heart rate and phone notifications over BLE. You need ESP32-C3 SuperMini, 1.28 inch round TFT (GC9A01), BMI160 6-axis IMU, MAX30102 pulse oximeter and heart rate sensor, Li-Po battery 3.7 V 500 mAh, TP4056 Charging Module, Vibration motor (coin type) and Tactile push button 6 mm.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Fit a display, sensors and battery into a wearable and manage power.
Parts list
- Development Boards
- Displays
- Sensors
- Sensors
- Batteries
- Power
- Motors & Actuators
- Switches
How to build it
- Draw the watch face
- Wake the screen on a wrist raise
- Read heart rate on demand
- Receive notifications over BLE
- Get a full day from the battery
Common questions
What parts do I need for the DIY smartwatch?
ESP32-C3 SuperMini, 1.28 inch round TFT (GC9A01), BMI160 6-axis IMU, MAX30102 pulse oximeter and heart rate sensor, Li-Po battery 3.7 V 500 mAh, TP4056 Charging Module, Vibration motor (coin type) and Tactile push button 6 mm.
How long does the DIY smartwatch take to build?
About 600 minutes for a advanced maker.
