Components / Boards / ESP32-C3 SuperMini

ESP32-C3 SuperMini

Thumb-sized RISC-V ESP32 with Wi-Fi, Bluetooth LE and native USB.

MicrocontrollerESP32-C3, single-core RISC-V 160 MHz
Flash4 MB
RAM400 KB
Logic level3.3 V
Development BoardsReviewedMPN ESP32-C3 SuperMiniUsed in 23 projects
ESP32
In short

What is the ESP32-C3 SuperMini and what is it used for?

Thumb-sized RISC-V ESP32 with Wi-Fi, Bluetooth LE and native USB. Makers use it for tiny Wi-Fi sensors, wearables.

How it works

A single-core RISC-V ESP32-C3 with built-in USB serial, Wi-Fi and Bluetooth LE, on a thumbnail-sized board.

Key specifications

Development board specValue
MicrocontrollerESP32-C3, single-core RISC-V 160 MHz
Flash4 MB
RAM400 KB
Logic level3.3 V
Input voltage5 V USB-C
I/O pins13 GPIO
ADC12-bit
WirelessWi-Fi 2.4 GHz, Bluetooth 5 LE

Pinout

5VUSB-C 5 V
3V33.3 V out
GPIO8Blue LED and strapping pin (default I2C SDA)
GPIO9BOOT button (default I2C SCL)
GPIO20 GPIO21UART RX TX
GPIO0 to GPIO4ADC inputs
GPIO18 GPIO19Native USB (do not use)

How to use it

Select ESP32C3 Dev Module and turn on USB CDC On Boot so Serial prints over USB-C. If upload fails, hold BOOT, tap RST and release BOOT. Some clones have a weak antenna, so test range before fitting it in a box.

Applications

Alternatives

Buy at

Common questions

What is the ESP32-C3 SuperMini used for?

In maker projects: tiny Wi-Fi sensors, wearables.

How does the ESP32-C3 SuperMini work?

A single-core RISC-V ESP32-C3 with built-in USB serial, Wi-Fi and Bluetooth LE, on a thumbnail-sized board.

What can I use instead of the ESP32-C3 SuperMini?

Seeed XIAO ESP32C3 and ESP32-C3 DevKitM-1.