Tactile push button 6 mm
Momentary switch for user input.
Colour / typeMomentary push button, 6 × 6 mm
Contact ratingAbout 50 mA at 12 V DC (signal only)
Package4-pin through-hole
PolarityNot polarised; pins in pairs are joined inside
SwitchesReviewedMPN 6 × 6 mm tact switchUsed in 550 projects
In short
What is the Tactile push button 6 mm and what is it used for?
Momentary switch for user input. Makers use it for digital input practice.
In the real world
Keypads, reset buttons
How it works
Pressing joins two pairs of contacts. Contacts bounce for a few milliseconds.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | Momentary push button, 6 × 6 mm |
| Contact rating | About 50 mA at 12 V DC (signal only) |
| Package | 4-pin through-hole |
| Polarity | Not polarised; pins in pairs are joined inside |
Pinout
Pins 1–2Always connected together
Pins 3–4Always connected together
PressJoins pair 1–2 to pair 3–4
How to use it
Wire one side to a GPIO and the other to GND, and enable the internal pull-up. Debounce in code.
Applications
User inputReset and mode buttons
Builds that use it
Guided build
LED and button controller
Guided build
Traffic light with crossing button
Guided build
DC motor speed and direction
Guided build
Desk motion counter
Guided build
Two-player reaction game
Guided build
Digital stopwatch
Guided build
PIR intruder alarm with arm button
Guided build
Min-max thermometer with LCD
Showing 8 of 550
Common questions
What is the Tactile push button 6 mm used for?
In products: keypads, reset buttons. In maker projects: digital input practice.
How does the Tactile push button 6 mm work?
Pressing joins two pairs of contacts. Contacts bounce for a few milliseconds.
