Components / Power / TP4056 Charging Module

TP4056 Charging Module

Lithium-ion charging module; protection depends on the exact assembly.

FunctionSingle-cell Li-ion charger (constant current, then constant voltage)
Input voltage4.5 to 5.5 V via USB
Output voltageCharges to 4.2 V ±1 %
Output current1 A default, set by RPROG (1.2 kΩ); swap the resistor for less
PowerReviewedMPN TP4056 module with DW01Used in 8 projects
TP4056
In short

What is the TP4056 Charging Module and what is it used for?

Lithium-ion charging module; protection depends on the exact assembly. Makers use it to read battery-safety limits; no unreviewed build.

Only for single Li-ion or Li-Po cells. Never for LiFePO4 or series packs.
In the real world

Single-cell charging products

How it works

Power-conversion parts require current, thermal, efficiency, polarity and protection assessment before use.

Key specifications

Power module specValue
FunctionSingle-cell Li-ion charger (constant current, then constant voltage)
Input voltage4.5 to 5.5 V via USB
Output voltageCharges to 4.2 V ±1 %
Output current1 A default, set by RPROG (1.2 kΩ); swap the resistor for less
Efficiency or dropoutLinear charger: the chip gets warm at 1 A
ProtectionVersions with a DW01 and two MOSFETs add over-discharge, overcharge and short protection

Pinout

IN+ / IN−5 V input (or the USB socket)
B+ / B−Battery terminals
OUT+ / OUT−Load (protected versions only)

How to use it

Charges one 18650 or pouch cell. Buy the version with OUT+ and OUT− pads: it has the protection chip. Lower RPROG's current for small cells (charge at 1C or less).

Applications

Alternatives

Buy at

Common questions

What is the TP4056 Charging Module used for?

In products: single-cell charging products. In maker projects: read battery-safety limits; no unreviewed build.

How does the TP4056 Charging Module work?

Power-conversion parts require current, thermal, efficiency, polarity and protection assessment before use.

What voltage does the TP4056 Charging Module need?

4.5 to 5.5 V via USB.

What can I use instead of the TP4056 Charging Module?

MT3608 Boost Module.