Components / Sensors / BMI160 6-axis IMU

BMI160 6-axis IMU

Low-power accelerometer and gyro.

MeasuresAcceleration and rotation
InterfaceI2C or SPI
I2C address0x68 or 0x69
Supply voltage1.71 to 3.6 V
SensorsReviewedMPN BMI160Used in 5 projects
BMI160
In short

What is the BMI160 6-axis IMU and what is it used for?

Low-power accelerometer and gyro. Makers use it for wearables.

How it works

A low-power MEMS accelerometer and gyroscope.

Key specifications

Sensor specValue
MeasuresAcceleration and rotation
InterfaceI2C or SPI
I2C address0x68 or 0x69
Supply voltage1.71 to 3.6 V

Pinout

VIN3.3 to 5 V on modules
GNDGround
SCLI2C or SPI clock
SDAI2C data or SPI
SAOAddress 0x68 or 0x69
CSHigh for I2C
INT1 and INT2Interrupts

How to use it

Use the DFRobot or Bosch BMI160 library. Very low power, with a step counter on the chip.

Applications

Alternatives

Buy at

Common questions

What is the BMI160 6-axis IMU used for?

In maker projects: wearables.

How does the BMI160 6-axis IMU work?

A low-power MEMS accelerometer and gyroscope.

What voltage does the BMI160 6-axis IMU need?

1.71 to 3.6 V.

How do I connect the BMI160 6-axis IMU to an Arduino or ESP32?

I2C or SPI. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C or SPI clock), SDA (I2C data or SPI), SAO (Address 0x68 or 0x69), CS (High for I2C).

What can I use instead of the BMI160 6-axis IMU?

MPU6050 IMU.