Idea
In short
How do you build a compass belt with vibration?
A small belt vibrates on the side facing north, to learn how magnetic sensors work. You need ESP32-C3 SuperMini, MPU6050 IMU, Vibration motor (coin type), Resistor 1 kΩ, NPN Transistor 2N2222, Li-Po battery 3.7 V 500 mAh and TP4056 module with protection (USB-C).
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a magnetometer and point to north.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Passives
- Semiconductors
- Batteries
- Power
How to build it
- Read the magnetic field
- Calibrate hard-iron offsets
- Compute a heading
- Vibrate the matching motor
- Test away from metal
Related projects
Common questions
What parts do I need for the compass belt with vibration?
ESP32-C3 SuperMini, MPU6050 IMU, Vibration motor (coin type), Resistor 1 kΩ, NPN Transistor 2N2222, Li-Po battery 3.7 V 500 mAh and TP4056 module with protection (USB-C).
How long does the compass belt with vibration take to build?
About 270 minutes for a intermediate maker.
