Projects / Ideas / GPS trip meter

GPS trip meter

IntermediateVehiclesIdeaReviewed
In short

How do you build a GPS trip meter?

A GPS module shows speed, distance and time for a bicycle ride on a small display. You need Arduino Nano, GPS module NEO-6M, SSD1306 OLED Display, Tactile push button 6 mm, Resistor 10 kΩ, Li-Po battery 3.7 V 1000 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use GPS data to compute trips.

How to build it

  1. Read NMEA sentences
  2. Parse speed and position
  3. Compute trip distance
  4. Show data on the OLED
  5. Add a trip reset button

Related projects

Common questions

What parts do I need for the GPS trip meter?

Arduino Nano, GPS module NEO-6M, SSD1306 OLED Display, Tactile push button 6 mm, Resistor 10 kΩ, Li-Po battery 3.7 V 1000 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

How long does the GPS trip meter take to build?

About 210 minutes for a intermediate maker.