Projects / Ideas / GPS speed and heading display

GPS speed and heading display

IntermediateVehiclesIdeaReviewed
In short

How do you build a GPS speed and heading display?

A GPS module gives speed heading and time, shown on a small display for a bike or a walk. You need Arduino Nano, GPS module NEO-6M, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show speed and heading from GPS.

Parts list

How to build it

  1. Wire the module on a serial port
  2. Parse the position sentences
  3. Extract speed and heading
  4. Show them on the display
  5. Handle no-fix states

Related projects

Common questions

What parts do I need for the GPS speed and heading display?

Arduino Nano, GPS module NEO-6M, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the GPS speed and heading display take to build?

About 270 minutes for a intermediate maker.