Li-Po battery 3.7 V 1000 mAh
Flat lithium polymer cell with a JST connector.
ChemistryLithium polymer
Voltage3.7 V nominal, 4.2 V full
Capacity1000 mAh
DischargeAbout 1C
BatteriesReviewedMPN 103450 LiPoUsed in 23 projects
In short
What is the Li-Po battery 3.7 V 1000 mAh and what is it used for?
Flat lithium polymer cell with a JST connector. Makers use it for wearables, ESP32 projects.
How it works
A lithium polymer pouch cell, 4.2 V full and about 3.7 V on average.
Key specifications
| Battery spec | Value |
|---|---|
| Chemistry | Lithium polymer |
| Voltage | 3.7 V nominal, 4.2 V full |
| Capacity | 1000 mAh |
| Discharge | About 1C |
| Size | About 50 × 34 × 10 mm |
| Watch out for | Charge with a Li-ion charger only; check connector polarity |
Pinout
Red+
Black- (check JST polarity)
How to use it
Charge with a TP4056 at no more than 1C. Never let it drop below 3.0 V, never puncture or bend it, and stop using it if it swells.
Applications
WearablesESP32 projects
Builds that use it
Guided build
Bicycle speedometer and odometer
Guided build
ESP-NOW remote control
Guided build
Device heartbeat and offline alerts
Guided build
Moving cat ears headband
Guided build
LED cosplay goggles
Guided build
Running safety vest with lights
Guided build
Bath-tub Bluetooth boat
Guided build
Battery and USB load sharing circuit
Showing 8 of 23
Alternatives
- Li-Po battery 3.7 V 2000 mAhMore capacity
Common questions
What is the Li-Po battery 3.7 V 1000 mAh used for?
In maker projects: wearables, ESP32 projects.
How does the Li-Po battery 3.7 V 1000 mAh work?
A lithium polymer pouch cell, 4.2 V full and about 3.7 V on average.
What voltage does the Li-Po battery 3.7 V 1000 mAh need?
3.7 V nominal, 4.2 V full.
What can I use instead of the Li-Po battery 3.7 V 1000 mAh?
TP4056 module with protection (USB-C) and Li-Po battery 3.7 V 2000 mAh.
