TP4056 module with protection (USB-C)
TP4056 charger with a DW01A protection chip, so the cell is also protected while in use.
What is the TP4056 module with protection (USB-C) and what is it used for?
TP4056 charger with a DW01A protection chip, so the cell is also protected while in use. Makers use it for li-ion powered projects.
The TP4056 charges with constant current then constant voltage to 4.2 V; the DW01A and its MOSFETs protect the cell.
Key specifications
| Power module spec | Value |
|---|---|
| Function | 1-cell Li-ion charger with battery protection |
| Input voltage | 4.5 to 5.5 V USB-C |
| Output voltage | 4.2 V charge, battery output via OUT+ and OUT− |
| Output current | 1 A charge (set by a resistor) |
| Protection | Over-charge, over-discharge, over-current |
Pinout
How to use it
Connect the cell to B+ and B−, and your circuit to OUT+ and OUT− so the protection chip cuts off at about 2.5 V. Charge current is 1 A by default; change the PROG resistor for small cells (for example 3.3 kΩ for about 360 mA).
Applications
Builds that use it
Power cut logger
Solar bird scarer for crop fields
Bike tail light with brake flash
Portable Bluetooth speaker
E-paper calendar and agenda
Society dustbin full-level reporter
Bath-tub Bluetooth boat
Air quality map on a bicycle
Alternatives
- CN3065 solar Li-ion charger moduleBetter with solar panels
- 18650 battery charger and boost (5 V / 1 A)Charger plus 5 V output
Common questions
What is the TP4056 module with protection (USB-C) used for?
In maker projects: li-ion powered projects.
How does the TP4056 module with protection (USB-C) work?
The TP4056 charges with constant current then constant voltage to 4.2 V; the DW01A and its MOSFETs protect the cell.
What voltage does the TP4056 module with protection (USB-C) need?
4.5 to 5.5 V USB-C.
What can I use instead of the TP4056 module with protection (USB-C)?
CN3065 solar Li-ion charger module and 18650 battery charger and boost (5 V / 1 A).
